A10 Gps Vehicles Tracker Location Finder

Vision XP A10 GPS Tracker Location Finder Standalone Long Battery Backup Gps Tracker

A10 Gps Vehicles Tracker Location Finder

Specification

• Model : VAX10
• Application : Car , boat or bulky goods tracking, any Road Transport Vehicles
• Features : Stong magenetic for installation, long standby time, remote tracking

Structure

• Color : Black
• Net weight : 132g
• Size : 96*60*22.6mm
• Size of package : 137(L)X85(W)X40(H)mm
• Weight : 230g
• Buttons : SOS key
• GPS anttnna : High sensitive ceramic antenna
• GSM antenna : Copper-Nickel Alloy
• Battery : 5000mAh
• SIM card slot : one slot
• I/O port : USB port for charging

Hardware

• Chipset : MTK MT6261
• GPS chip : MTK3337
• GPRS : Class 12
• GPS singal : L1,1575.42MHz C/A code
• GPS channels : 22 channels
• GPS chip : Tracking Sensitivity:-159dBm, acquisition sensitivity:-143dBm
• GPS accuracy : 5~15m
• LBS accuracy : 100-1000M
• Minimum standby current : <0.5 mA
• Average standby current : <2.5 mA
• Deep dormancy  current : <5 uA
• Average working currency : <55mA
• Working temperature : -20~70℃
• working humidity : 5% to 95% 
• GPS antenna : Built-in high sensitivity ceramic antenna
• GSM antenna : Four frequency PIFA antenna
• Bluetooth  : Compatible
• G-sensor : Compatible
• Speaker : No
• MIC : Optional

Software

• Supported OS : Support android 2.3 or above IOS5.0 or above
• Languages : Chinese/English
• GSM+GPRS+GPS : GPS+LBS dual mode
• AGPS : Cool start 26s positioning
• Power manage : Ultra-low power consumption of power management, intelligentdormancy
• Geofence : Alarm when out of setup range
• Historical track : Three monthes's historical track
• Remote update : Remote update app ,remote maintenance & regulation, remote parameter

1,Application method
1. Before use, please test equipment model is correct, accessories are complete.
2. In shutdown state insert support GSM network SIM card (GSM 850,900,1800,1900MHZ)and

3. open the caller id function and monthly flow (not less than 30 m/month traffic package). 3.Power on: press on the power button for 3 seconds or more then powered on.
4. Shutdown: When mobile phone APP display equipment online, through the app setting

remote shutdown function to turn it off.
When mobile phone APP display equipment offline, please take out the Sim card and long press power button for power off.
5.Charge: insert the USB charging line, connected to the output of 5v - 1a standard mobile phone

adapter, from no power to full about 8 hours.

2,Product function(„*‟for matching function) 1. Real-time tracking
2. Historical route
3. Geo-fence

4. Voice monitoring
5.* Demolition alarm
6. Vibration alarm
7. Displacement alarm
8.Various work modes: rapid positioning, standard positioning and save electricity positioning. 9. Multi-platform monitoring: support android, apple mobile phone system, computer network

clients, etc

4, Function declaration 4.1 Working mode setting

There are three kinds of working mode. User through setting in the phone APP software function to set the working mode.

1, rapid positioning (1 minute) : equipment at 1 minute intervals update location information, rapid positioning model the locator use battery faster.
2,standard positioning (10 minutes) : equipment according to the time of 10 minutes interval update location information.

3,save electricity positioning (an hour): equipment in one hour time interval update location information, the power-saving mode use battery is slowly.

4.2 Historical route query
This product can keep 3 months of route information. If two anchor point position is very close,

this product will be in the route filter position very close point.

4.3 Geo-fence
Users in the cell phone APP choose Geo-fence function, on the map can set Geo-fence round, if

the device away from fences, mobile phone APP client-side will display the alarm information. Alarm information time is related to the positioning interval time setting, The smaller positioning time interval can get timely alarm information.

4.4 Voice monitoring
Select voice monitoring function in setting up and fill in your mobile phone number, wait for a

while and after confirmation equipment will be sent a calling to your number, you can listen to the voice around locator after answering. Set up after the white list, the inside of white list number will send a calling to device, device will automatic answer, can listen to the voice around locator.

4.5 Demolition alarm
Device with the demolition sensor on the back. If induction sensor obscured for more than 3 minutes, when people take it and let the device induction sensor not obscured , device will send demolition alarm message.

4.6 Vibration alarm
Device with vibration sensor, when vibration alarm switch turn on, vibration equipment detected for more than 5 seconds, vibration alarm information will be issued by device.

4.7 Displacement alarm
In the case of GPS positioning, when displacement alarm switch turn on, equipment detect

displacement of more than 200 meters, device will send displacement alarm information itself.

4.8 SMS monitor number and language time zone setting
After Set message monitoring number, SMS monitoring number can give device issued message

commands (specific message instructions please contact retailers). SMS alarm monitoring number can receive device sent text messages and other notification message. Time zone is set up for foreign language users design features, user does not need to set up in China.

5,Key description
When shutdown state with enough power press power key locator will starting up. Locator

online can not shut down manually, under the condition of locator offline can press power key to turn it off manually.

6, Light effect show
Starting up: Indicator light for 3 seconds.
Charging: In charging process indicator light flashing，after full indicator long time turn on. Keys: When starting up press the power button indicator for 2 seconds

Extra Information

• SKU: GPS100
• Warranty: 1 Year
• Brand: VisionXP
• Product Type: GPS Tracker
• PDF: View PDF