Complete Setup Guide: How to Install a Video Door Phone System in Your Home

Want to install a video door phone? Here’s a step‑by‑step guide:

What You’ll Need:

• Video door phone kit (front panel + indoor monitor)

• Power adapter or door panel wiring

• Tools: drill, screwdriver, cable ties

• Cabling (2‑4‑core wires), wall plugs, trunking

1. Choose Mounting Locations
Place the door panel near your entrance, about 1.5m height. Monitor goes on a wall inside, central in the home.

2. Run the Wires
Feed 2‑4 core cable from the panel to monitor. Connect to power adapter or transformer per instructions. Keep wiring neat in trunking.

3. Mount the Units
Drill holes, secure fittings, and attach the front panel with screws. Fix the monitor inside and ensure it powers on without flickering.

4. Configure the System
Power up both units. Test call button—should ring on monitor. Adjust brightness, volume, and message settings via menu.

5. Link with Smart Lock (Optional)
If your door lock supports integration, pair using the panel menu or dedicated app. Now you can unlock doors directly from the monitor.

6. Final Testing
Check video clarity, call response time, unlocking feature, and audio quality. Fix any loose wires or misalignments.

🔧 Maintenance Tips:

• Clean panel camera lens every few months.

• Keep again firmware updated.

• Check wiring yearly to avoid loose connections.