4 Camera Cctv Power Supply

Output -

• DC Voltage (Selected by switch) :  | 12V | 13.5V | 15V
• Rated Current : 5A | 4.45A | 4A
• Current Range : 0~5A | 0-4.45A | 0~4A
• Rated Powe : 60W
• Ripple & Noise (max.) : 120mVp-p | 120mVp-p | 150m Vp-p
• Voltage Range : 11.4~12.6V | 12.82~14.17V | 14.25~ 15.75V
• Line Regulation : ±1.0% | ±1.0% | ±1.0%
• Load Regulation : ±5.0% | ±5.0% | ±5.0%
• Setup,Rise time : 2500ms,15ms at full load
• Hold Up Time(Typ.) : 20ms at full load

Input - 

• Voltage Range : 150~285VAC
• Frequency Range : 47~63HZ
• Efficiency (Typ.) : 86% | 86% | 86%
• AC Current (Typ.) : 1A / 220VAC
• Inrush Current (Typ.) : Cold Start:40A/220VAC
• Leakage Current : <2mA / 240VAC

Protection - 

• Over Load : 110~200% rated output power | Protection type: Shut down O/P,recovers automatically 
• Over Current  : 110~200% rated output current | Protection type: Shut down O/P,re-power on to recover
• Short circuit : Protection type: Shut down O/P,recovers automatically after fault removed

Environment - 

• Working Temperature : -20~+45°C  
• Working Humidity : 20~90% RH  Non-condensing
• Storage temp & humidity : -20~+85°C, 10~95%RH
• Temp.coefficient : ±0.03%/°C (0~50°C)
• Vibration : 10 ~ 500Hz, 3G 10min./1 cycle,60min.each along X,Y,Z axes

Safety & EMC - 

• Safety Standards : UL60950-1 standard
• Withstand Voltage : I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
• Isolation Resistance : I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25°C/ 70%  RH
• EMC Emission : Compliance to EN55022(CISPR22) Class B, EN61000-3-2,-3, GB9254 Class B
• EMC Immunity : Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A

Others - 

• MTBF : 10000hrs     MIL-HDBK-217F (25°C)
• Dimension : 144*109.5*33 mm (L*W*H)
• Weight : 0.27kg/pc

Note -

• All parameters NOT specially mentioned  are measured at 220VAC input, rated load  and 25°C of ambient temperature.
• Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
• Tolerance: includes set up tolerance, line regulation and load regulation.
• Derating may be needed under low input voltages.